Project Shelving is designed to accommodate loadings of 300 kg each shelf. Widths to 600 mm may utilise the moulded A.B.S. shelf. Shelves of 750 mm, 900 mm and 1000 mm mm can be - wire grid, solid sheet or 25 mm x 25 mm x 1.6 mm Dunnage style.

SPECIFICATIONS
FRAMES - 32 mm x 2.5 mm roll formed section. Available in Mild Steel and Stainless Steel - 304 or 316 grade. Reinforcing bars 25 mm x 5 mm, positioned for maximum strength.
SHELVES - "Wire Grid" - 4 mm wires at 25 mm centres on 8 mm supports set at 150 mm centres.
"Moulded" (Real Tuff) - Manufactured from A.B.S. material. Will not rust or chip. Safe for Freezer and Dishwasher use.
"Solid" - Stainless Steel or Galvanised are available for all frames.
"Dunnage" - 25.4 x 25.4 mm x 1.6 mm tube.
POSTS - 25 x 25 x 1.2 mm. Nylon foot gives 32 mm of adjustment. S/Steel foot allows for floor fixing and provides 65 mm of adjustment. Castors of 125 mm fit security to post. Adjustment for shelves is provided every 50 mm. The use of post joiner (Part No. 15220 distributes load when used with Nylon foot.
FINISHES - Electro-Galvanised with oven baked clear polester coat.
LENGTHS - 600 mm to 1800 mm (increments of 150 mm).
WIDTHS - "Wire Grid" and "Solid" - 300, 375, 450, 525, 600, 750,900, 1000 mm.
"Moulded" (Real Tuff) - 300, 450, 525 and 600 mm.
HEIGHTS - Stock 1200 mm, 1800 mm and 2000 mm. Use Post Joiner (Part No. 1522) to achieve any height required.
OPTIONS - Bridge and Corner clips for clear uninterupted access. Back and Side Ledges and also Shelf Dividers available.